(Gd,Lu)3Al5O12∶Tb3+,Eu3+透明陶瓷制备与发光性能

通过简单的化学沉淀法制备了纳米前驱体,结合真空烧结工艺,制备了一系列镥稳定钆铝石榴石{(Gd, Lu)₃Al₅O₁₂∶Tb,Eu}透明陶瓷。将透明陶瓷加工成1 mm厚的圆片,对透明陶瓷样品进行了X射线衍射、光致发光、透过率和衰减时间等表征。高温烧结过后,陶瓷样品仍保持稳定的石榴石相。选定313 nm作为透明陶瓷的激发波长,可获得最强的荧光发射。此外,通过对不同样品进行紫外可见荧光测试,获得了由绿光到红光的可调节发射。在313 nm激发,543 nm和591 nm的监测波长下,透明陶瓷样品均具有Eu³⁺的毫秒级衰减时间。     

Ru、Rh、Pd掺杂GaSb的电子结构和光学性质

运用第一性原理计算方法研究了过渡族金属TM(TM=Ru、Rh、Pd)掺杂GaSb的电子结构和光学性质,结果表明:TM掺杂GaSb主要以TM替代Ga(TM @Ga)缺陷存在,并可增强GaSb半导体材料对红外光区光子的响应,使体系光学吸收谱的吸收边红移;TM@Ga所引入的杂质能级分布于零点费米能级附近,这极大地增强了体系的介电性能,促进了电子-空穴对的产生和迁移,因而提升了掺杂体系的光电转换效率;Ru 掺杂对GaSb光学性质的改善最为明显,当掺杂浓度为6.25%(原子数分数)且均匀掺杂时,Ru掺杂GaSb体系对红外光区光子的吸收幅度最大,有效提升了GaSb光电转换效率和光催化活性。     

Fe掺杂α-Bi2O3光电性质的第一性原理研究

采用第一性原理杂化泛函HSE06方法对Fe掺杂α-Bi₂O₃的电子结构和光学性质进行了计算研究。结果表明,Fe掺杂α-Bi₂O₃体系有较小的结构变形,本征α-Bi₂O₃的禁带宽度为2.69 eV,Fe掺杂使α-Bi₂O₃的禁带宽度减小(约为2.34 eV)。对其光学性质研究得出Fe掺杂扩展了α-Bi₂O₃对可见光的吸收范围,即发生了红移,从而为Fe掺杂α-Bi₂O₃在光催化领域中的应用提供了理论依据。     

Remarkable Size Effect on Photophysical and Nonlinear Optical Properties of All-Carboatomic Rings,Cyclo[18]carbon and Its Analogues

Inspired by recent experimental observation of molecular morphology and theoretical predictions of multiple properties of cyclo[18]carbon, we systematically studied the photophysical and nonlinear optical properties of cyclo[2N]carbons (N=3–15) allotropes through density functional theory. This work unveils the unusual optical properties of the sp-hybridized carbon rings with different sizes. The remarkable size dependence of the optical properties of these systems and their underlying nature are profoundly explored, and the relevance between aromaticity and optical properties are highlighted. The extrapolation curves fitted for energy level of frontier molecular orbitals, maximum absorption wavelength, and (hyper)polarizability of considered carbon rings are presented, which can be used to reliably predict corresponding properties for arbitrarily large carbon rings. The findings in this study will facilitate the exploration of potential application of cyclocarbons in the field of optical materials.     

不同退火条件对PEALD制备的Ga2O3薄膜特性的影响

利用等离子增强原子层沉积技术(PEALD)在c面蓝宝石衬底上制备了氧化镓(Ga₂O₃)薄膜,研究了退火气氛(v(N₂)∶v(O₂)=1∶1(体积比)、空气和N₂)及退火时间对Ga₂O₃薄膜晶体结构、表面形貌和光学性质的影响。研究结果表明,退火前的氧化镓处于亚稳态,不同退火气氛下退火后晶体结构发生明显改变,而且退火气氛中N₂比例增加有利于Ga₂O₃重结晶。在N₂气氛下退火达到30 min,薄膜结构已由亚稳态转变成择优取向的β-Ga₂O₃。而且表面形貌分析表明,退火30 min后表面形貌开始趋于稳定,表面晶粒密度不再增加。另外实验样品在 400~800 nm的平均透射率几乎是100%,且光吸收边陡峭。采用N₂气氛退火,对于富氧环境下沉积的Ga₂O₃更利于薄膜表面原子迁移,以及择优取向Ga₂O₃重结晶。     

体积应变对立方钛酸铅电子结构和光学性质的影响

本文利用第一性原理方法计算并分析了体积应变(-11%~11%)对立方顺电相PbTiO₃的结构、稳定性、电子结构和光学性质的影响。研究发现体积应变后PbTiO₃形成焓增大,稳定性下降,其中压应变对其稳定性的影响比拉应变大。当受到拉伸应变时,立方PbTiO₃由直接带隙半导体变为间接带隙半导体,且带隙随应变增大呈先增大后降低的趋势。在发生压应变时,从复介电函数、复折射率及吸收系数的分析结果可知,在自然光照下PbTiO₃的光吸收能力仅在个别波段有所增大,但总体呈减弱趋势,当产生拉伸应变时,介电峰、吸收峰红移,表明PbTiO₃在可见光范围内光吸收能力增强,并且当应变增大到11%时,PbTiO₃的吸收能力远高于本征立方相。     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

Tail behavior of supremum of a random walk when Cramér’s condition fails

We investigate tail behavior of the supremum of a random walk in the case that Cramer＇s condition fails, namely, the intermediate case and the heavy-tailed ease. When the integrated distribution of the increment of the random walk belongs to the intersection of exponential distribution class and O-subexponential distribution class, under some other suitable conditions, we obtain some asymptotic estimates for the tail probability of the supremum and prove that the distribution of the supremum also belongs to the same distribution class. The obtained results generalize some corresponding results of N. Veraverbeke. Finally, these results are applied to renewal risk model, and asymptotic estimates for the ruin probability are presented.     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236